Mostki ahead standardowe

(19)

do produktu

RRP: 39,99 €

25,95 €

plus 14,31 € koszty wysyłki do USA

produkt dostępny

Ritchey Comp 4 Axis stem

The Ritchey Comp stem presents 4 AXIS technology for the entry level. Forged from robust aluminium 6061, this stem has a specially shaped clamping plate with rounded edges and closely placed 4-point clamping for an effective and protective hold on aluminium and carbon handlebars. With a sporty angle of +/-6°, this stem is suitable for both race bikes and mountain bikes. · handlebar clamp: Ø 31,8 mm · clamping height on fork shaft: 42 mm · screwable 4-point handlebar clamp · angle: ±6° · for threadless forks with outer shaft Ø 28,6 mm* · weight: approx. 146 g (100 mm)

100mm

110mm

120mm

130mm

60mm

70mm

80mm

90mm

- 35%

(42)

do produktu

dawna cena: 23,95 €

21,95 €

plus 13,86 € koszty wysyłki do USA

produkt dostępny

Xtreme Pro High Rise 40 stem

A stem for those who are looking for something back-friendly. With its +40°, this stem gives everyone an upright position. But due to the fact that it can also be ridden with -40°, it is the right component for time trial cyclists or triathletes as well. · Handlebar clamp: Ø 31,8 mm · Material: aluminium 6061 T6 · For threadless forks with shaft outer Ø 28,6 mm* · Clamping height on the steerer tube: 50 mm · Screw-on 4-point handlebar clamp · Angle: ±40° · Weight: approx. 145 g (80 mm) · Available in length: 80, 90, 100, 110, 120 or 130 mm Please specify length! · Category: 3 (please click on the button for more information) The stem may be used on paved roads, gravel paths and demanding trails with jumps and steps up to a height of 60 cm.

100mm

110mm

120mm

130mm

80mm

90mm

- 8%

(3)

do produktu

RRP: 52,95 €

34,90 €

plus 14,40 € koszty wysyłki do USA

produkt dostępny

Ritchey Adjust 4Axis stem

With the Ritchey Adjust stem, you don't have to choose just a single riding position. Instead, you have the possibility to adjust the angle by up to 110°. The interlocking ratchet construction in the joint area ensures a great stability of the stem. · Handlebar clamp: Ø 31,8 mm · Material: aluminium 6061, 3D forged · For threadless forks with a steerer outer Ø of 28,6 mm (with reducing sleeve also suitable for forks with a steerer outer Ø of 25,4 mm, see item no. 522566) · Clamping height on steerer tube: 40 mm · Screw-on 4-point handlebar clamp · Adjustable from - 55° to + 55° · Weight: approx. 219 g (90 mm)

105mm

120mm

90mm

- 34%

(9)

do produktu

dawna cena: 27,95 €

24,95 €

plus 13,68 € koszty wysyłki do USA

produkt dostępny

ROSE Race Attack OSC stem

The ROSE stem has been specially developed for demanding cyclists. Its symbiosis of low weight and optimum stiffness qualify the ROSE stem for use on race bikes as well as on MTBs and ATBs. The mesh-fit screw connection on the clamping plate ensures that the handlebar is held stably while tightening torques are kept low, which means that the handlebar is subjected only to low stresses in the clamping area. · Handlebar clamp: Ø 31,8 mm · Material: 3D forged aluminium 6061 · Clamping height on fork shaft: 40 mm · Screw-on 4-point handlebar clamp · Angle: ±7° · For threadless forks with outer shaft Ø 28,6 mm* · Weight: approx. 110 g (100 mm) · Supplied in length 60, 70, 80, 90, 100, 110, 120 or 130 mm Please specify length! · Category: 3 (please click on the button for more information) The stem may not be used for extreme areas of use, such as jumps over 60 cm, extremely steep and demanding terrain or for downhill riding and freeriding.

100mm

110mm

120mm

130mm

60mm

70mm

80mm

90mm

- 11%

(9)

do produktu

24,95 €

plus 13,80 € koszty wysyłki do USA

produkt dostępny

ROSE High Comfort stem

Due to its slightly v-shaped handlebar clamping plate, this elegant stem looks quite interesting. With an angle of 17°, you get a comfortable riding position without having to compromise on road behaviour. For those who prefer an athletic riding position, the stem can also be used with -17°. · Handlebar clamp: Ø 31,8 mm · Material: aluminium 6061 T6 · Clamping height on steerer tube: 42 mm · Screw-on 4-point handlebar clamp · Angle: ±17° · For threadless forks with shaft outer Ø 28,6 mm* · Weight: approx.140 g (100 mm) · Available in 70, 80, 90, 100, 110 or 120 mm length Please specify length! · Category: 3 (please click on the button for more information) The stem may be used on paved roads, gravel paths and demanding trails with jumps and steps up to a height of 60 cm.

100mm

110mm

120mm

70mm

80mm

90mm

(35)

do produktu

23,95 €

plus 14,04 € koszty wysyłki do USA

Produkt będzie wkrótce dostępny

Xtreme Pro stem

This stem looks very discreet, but is indeed a power pack for very tough rides. Its compact design allows a relaxed riding position which provides perfect control of your bike. · Material: aluminium · Angle: +25° · For threadless forks with shaft outer Ø 28,6 mm (incl. adapter for shaft outer Ø 25,4 mm) · Clamping height on the steerer tube: 44 mm · Screw-on 4-point handlebar clamp · Length: 60 mm · Weight: approx. 180 g (Ø 31,8 mm) · Available in handlebar clamp Ø 25,4 or 31,8 mm Please specify handlebar clamp! · Category: 4 (please click on the button for more information) The stem may be used on paved roads, gravel paths and demanding terrain with jumps and steps up to a height of 120 cm.

25,4mm

31,8mm

(27)

do produktu

dawna cena: 18,94 €

16,95 €

plus 13,97 € koszty wysyłki do USA

produkt dostępny, dostępny tylko w ograniczonej ilości

Xtreme Comp High Rise stem

A steep stem with a gorgeous look for a relaxed riding position. · Handlebar clamp: Ø 25,4 mm · Material: aluminium 6061 T6 · Angle: +35° · For threadless forks with shaft outer Ø 28,6 mm* · Clamping height on the steerer tube: 40 mm · Screw-on 4-point handlebar clamp · Weight: approx. 160 g (110 mm) · Available in 75, 90, 110, 120 or 135 mm length Please specify length! · Category: 3 (please click on the button for more information) The stem may be used on paved roads, gravel paths and demanding trails with jumps and steps up to a height of 60 cm.

110mm

120mm

135mm

75mm

90mm

- 11%

(53)

do produktu

14,95 €

plus 13,94 € koszty wysyłki do USA

produkt dostępny

Xtreme Comp R-1 stem

The option of mounting it with a falling or rising angle makes it easier to determine the correct position on a road bike. · Handlebar clamp: Ø 26,0 mm · Material: aluminium 6061 T6 forged · For threadless forks with outer shaft Ø 28,6 mm (incl. adapter for outer shaft Ø 25,4 mm) · Screw-on handlebar clamp · Clamping height on fork shaft: 42 mm · Weight: approx. 175 g (100 mm) · Angle: ±10° · Supplied in length 60, 70, 80, 90, 100, 110, 120 or 130 mm Please specify length! · Category: 2 (please click on the button for more information) ROSE road bike stems may only be used on road bikes, cyclocross bikes as well as ATB/trekking bikes, and for the typical intended use of these bikes only.

100mm

110mm

120mm

60mm

70mm

80mm

90mm

(3)

do produktu

RRP: 69,00 €

26,00 €

plus 13,72 € koszty wysyłki do USA

produkt dostępny

Ritchey WCS 4-Axis stem

· Stack height: 42mm · Handlebar clamp: Ø 31,8mm · For 1 1/8" Ahead forks · Weight: approx. 111g (90 mm) · Angle: ± 6° · Available with a length of 90, 100, 110, 120 or 130mm Please select length!

110mm

130mm

- 62%

(45)

do produktu

24,95 €

plus 13,66 € koszty wysyłki do USA

produkt dostępny

ROSE OSC stem

The ROSE OSC (Optimal Stiffness Construction) stem combines low weight and maximum stiffness unlike hardly any other stem, because those are the attributes that ambitious racing cyclists look for. The winglet faceplate ensures optimum distribution of clamping forces as well as a reduction in sheer forces, which increases safety. The first-class workmanship and the stainless steel screws ensure long-term safety. Note: Approved for road bikes only! · Handlebar clamp: Ø 31,8 mm · Material: 3D forged aluminium 7050 T6 · Clamping height on fork shaft: 40 mm · Screw-on 4-point handlebar clamp · Angle: ±7° · For threadless forks with outer shaft Ø 28,6 mm* · Weight: approx. 100 g (100 mm) · Supplied in length 60, 70, 80, 90, 100, 110, 120 or 130 mm Please specify length! · Category: 2 (please click on the button for more information) The ROSE OSC stem may only be used on road bikes and only for the typical intended use of these bikes!

100mm

110mm

120mm

130mm

60mm

70mm

80mm

90mm

(0)

do produktu

59,95 €

plus 13,77 € koszty wysyłki do USA

produkt dostępny, dostępny tylko w ograniczonej ilości

Ritchey WCS 4-Axis 44 stem

· Height: 42mm · Handlebar clamping: Ø 31,8mm · For 1 1/8" Ahead fork · Weight: approx.: 117g (90 mm) · Angle: ± 6° · Available in 90, 100, 110, 120 or 130mm Please specify length!

130mm

(8)

do produktu

RRP: 39,90 €

23,95 €

plus 13,81 € koszty wysyłki do USA

produkt dostępny

ergotec Piranha 650B stem

It is vicious and robust – yet, the ergotec Piranha 650B stem is the perfect complement to 650B generation frames. Even though the stem with a 4-bolt handlebar clamp with a diameter of 31,8 mm and a shaft clamp of 28,6 mm is quite short with a length of 50 or 70 cm, it allows for a perfect riding position in combination with the handlebar. The ergotec Piranha offers you the possibility to individually adjust your handlebar/stem combo. Details: • Short stem for generation 650B frames • 4-bolt handlebar clamp with Ø 31,8 mm • Clamping height on steerer tube: 40 mm • Angle: +/-6° • For threadless forks with shaft outer Ø 28,6 mm (1 1/8") • ergotec safety level: 6 • Material: aluminium 6061 T6 • Weight: approx. 110 g (50 mm), approx. 115 g (70 mm) Available in a length of 50 mm or 70 mm. Please select the required length! Note: The 50mm stem comes without ergotec print! In the box: 1x ergotec Piranha 650B stem incl. mounting material Manufacturer's ref.: 40449001 (50 mm), 40447001 (70 mm)

50mm

70mm

- 40%

(19)

do produktu

RRP: 39,90 €

22,90 €

plus 14,18 € koszty wysyłki do USA

produkt dostępny, dostępny tylko w ograniczonej ilości

ergotec High Charisma stem

The ergotec High Charisma is made from 3D forged aluminium. It impresses with a closed steerer clamp and an attractive design. The generous angle of 45° allows for convincing comfort in the upright riding position. Details: • Lightweight stem for an upright riding position • 4-bolt handlebar clamp with Ø 25,4 mm • Clamping height on steerer tube: 40 mm • Angle: +45° • For threadless forks with shaft outer Ø 28,6 mm • Material: aluminium 6061 T6 3D forged • Weight: approx. 190 g (90 mm), approx. 195 g (110 mm) In the box: 1x ergotec High Charisma stem incl. mounting material Manufacturer's ref.: 40130001 (90 mm), 40135001 (110 mm)

110mm

90mm

- 43%

(0)

do produktu

RRP: 65,00 €

42,95 €

plus 14,13 € koszty wysyłki do USA

produkt dostępny, dostępny tylko w ograniczonej ilości

3T ARX Pro stem 2015 model ± 17°

High-quality stem with attractive design and very good stiffness values that allows for an athletic -17° or for a very comfortable +17° riding position! The ARX Pro weighs in length 110 mm a mere 130 g (approx.). The ARX Pro stem and the Ergosum Pro handlebar (item no. 2104805) form a symbiosis that is not only visually perfect. · Handlebar clamp: Ø 31,8 mm · Material: aluminium 2010 · Clamping height on steerer tube: 40 mm · Screw-on 4-point handlebar clamp · Angle: ±17° · For threadless forks with outer shaft Ø 28,6 mm · Weight: approx. 130 g (110 mm) · Available in length 80, 90, 100, 110, 120 or 130 mm Please specify length!

100mm

120mm

130mm

80mm

90mm

- 34%

(3)

do produktu

RRP: 74,90 €

56,90 €

plus 13,08 € koszty wysyłki do USA

produkt dostępny

Spank Spike Race "Bearclaw" stem

Spank Spike Race – with Bearclaw signature from the freeride legend Darren Berrecloth. The uncompromising, robust oversize design leaves no doubt about the Spank Spike Race's field of use. The stem offers sufficient reserves for the fun and downhill sector. Thanks to the exceptional CNC optimised shape and the 2D forged six series aluminium alloy it weighs only approx. 150 g. · Material: MGR 2D aluminium, CNC treated · Handlebar clamping: Ø 31,8 mm · Angle: 0° · For threadless forks with shaft outer Ø 28,6 mm · Clamping height on steerer tube: 35 mm · Weight 35 mm: approx. 135 g · Weight 50 mm: approx. 150 g · Incl. top cap Manufacturer's ref. black/blue "Bearclaw" shiny: spstm0039 Manufacturer's ref. black/grey "Bearclaw" shotpeen: spstm0044

35mm

50mm

- 24%

(3)

do produktu

RRP: 65,00 €

42,95 €

plus 14,12 € koszty wysyłki do USA

produkt dostępny, dostępny tylko w ograniczonej ilości

3T ARX Pro stem ± 6°

High-quality stem with attractive design and very good stiffness values. The ARX Pro weighs in length 110 mm a mere 130 g (approx.). The ARX Pro stem and the Ergosum Pro handlebar (item no. 2104805) form a symbiosis that is not only visually perfect. · Handlebar clamp: Ø 31,8 mm · Material: aluminium 2010 · Clamping height on steerer tube: 40 mm · Screw-on 4-point handlebar clamp · Angle: ±6° · For threadless forks with outer shaft Ø 28,6 mm · Weight: approx. 130 g (110 mm) · Available in length 80, 90, 100, 110, 120 or 130 mm

110mm

130mm

- 34%