The ROSE steerer tube extender allows you to easily lift your handlebar/stem construction to the desired riding position. Thanks to the included spacers, the clamping height of the stem is variable. · Incl. top cap and bolt · Material: aluminium · Clamping height on steerer tube: 40 mm · For steerer tube outer Ø 28,6 mm/threadless forks · For stems with clamping Ø of 28,6 mm · Available with a max. height adjustment of 50 mm, 90 mm or 120 mm Not suitable for forks with carbon steerer
The simple and quick handlebar height adjuster for your bike with up to 100 mm height extension upwards. And all within a matter of seconds and without any tools. Simply open the quick release, pull the handlebars up, close the quick release, done (fig. 1). The carefully manufactured Speedlifter meets the stringent requirements of the DIN plus standard. The following requirements must be met for the Speedlifter to be fitted: fork with steel steerer with outer Ø 28,6 mm (1 1/8"), threadless. · required steerer tube length: at least 46 mm above the upper edge of the headset · for Ahead stems with inner Ø 28,6 mm and 40 mm clamping height · incl. manual To mark the slits and holes on the steerer tube, we recommend to use the optionally available simpledrawtool (item no. 221689). The professional cut tool is available under item no. 199100.
The choice of stems for conventional (threaded) forks is unfortunately becoming smaller and smaller. Thanks to this proven stem shaft, you can expand your choice to stems for threadless forks in 1" and 1 1/8", too. · for stems with shaft clamp Ø 25,4 or 28,6 mm · clamping height for the stem: 40 mm · for forks with inner Ø 22,2 or 25,4 mm · total length: 140 mm (price without stem)
The Speedlifter Twist Plus with integrated angle-adjustable stem. The complete solution for anyone who is looking for ease of use, comfort and ergonomics, but who does not wish to compromise on practicability. All handlebar adjustments can be carried out without tools simply by hand. The slip-proof lever on the stem offers both the possibility of adjusting the angle of the stem, as well as the angle of the handlebar. The 100 mm height adjustment can be carried out accurately to the nearest millimetre using the quick-release on the shaft. The twist plus also features a safety stop with anti-theft protection. The twist plus can be turned through 90 degrees to the left or right using a small release lever. This is useful for storing your bike in small garages or when transporting it. · stem adjustable from 0° to +50° · 100 mm height adjustment · for 1 1/8" Ahead forks with steel shaft (inside Ø: 25,4mm) · required length of the steerer tube: at least 46 mm above the upper edge of the headset · handlebar clamp: Ø 25,4 mm · stem length: 100 mm · without Simpledrawtool
Very robust aluminium shaft extension to lift your stem by up to 80 mm. You can also vary the height of the handlebar by approx. 30 mm. · with specially developed fork clamp · clamping height on the steerer tube: 45 mm · for steere tube outer Ø 28,6 mm/threadless forks · incl. extra-long bolt and top cap
Always keep your eye on the time. With handlebars overflowing with navigation and tacho-systems, the vital bits often disappear in the background. This clock looks smart and uncluttered when fitted to any non-threaded systems using a steel conical clamp and an M6 screw. Instead of a boring top cap, your stem now shows the time. To avoid theft, it can be removed from its holder and clipped into a fob on your keyring. You simply pop in the blanking plug supplied to close the hole. · M6 x 30 mm screw, steel clamp for aluminium and steel steerer tubes (not suitable for carbon tubes) · clock face diameter: 27,6 mm · high-quality mechanism · for 1 1/8" steerer tubes · incl. key fob for practical transport (Price without decoration)
Thanks to a total length of 210 mm and a robust steel tube, an upright riding position is made possible when using a shaft stem. · height gain: approx. 100 mm · available for stem shaft Ø 22,2 mm and steerer tube inner Ø 22,2 mm or stem shaft Ø 25,4 mm and steerer tube inner Ø 25,4 mm Please specify stem shaft diameter! (Price without stem)
This high quality analogue clock is easy to fit and is intended for all Speedlifter systems. It is positioned where every rider can see it, so the time is always visible. To prevent theft, it can simply be removed from its holder and popped into the practical fob for your keyring. There is also a matching cover to close the open hole. · clock diameter: 27,6 mm · incl. key fob to carry the clock around
The simple and quick handlebar height adjuster for your bike with up to 100 mm height extension upwards. And all within a matter of seconds and without any tools. Simply open the quick-release, pull the handlebars up, close the quick-release, done (fig. 1). The carefully manufactured Speedlifter meets the stringent requirements of the DIN plus standard. The Speedlifter also has the advantage that you can turn the handlebar without tools with a small locking lever by 90° to the left or to the right until it snaps in (fig. 2). This is particularly practical if the bike is stored in the garage or cellar to save space, loaded into the car or onto the bike rack on the car. Thanks to the snap-in function, the adjustment of the handlebar becomes unnecessary when the handlebar is turned back into a straight position. The following requirements must be met for the Speedlifter to be fitted: fork with steel shaft with outer Ø 28,6 mm (1 1/8"), threadless · required length of the steerer tube: at least 46 mm above the upper edge of the headset · for Ahead stems with inside Ø 28,6 mm and 40 mm clamping height · incl. manual To mark the slits and holes on the steerer tube, we recommend to use the optionally available simpledrawtool (item no. 221689). The professional cut tool is available under item no. 199100.
With a flick of the wrist, you can loosen the quick release and position the handlebar-stem construction just where you like. For an easy transport or for parking in narrow places, e.g. in the garage, you can also turn the adapter to the side and position the handlebar along the direction of riding. · height adjustment range: 45 - 165 mm · graduated pivoting range: 100° to the left or to the right · only suitable for 1 1/8" steel steerer tubes (Ø 28,6 mm) with an innerØ of at least 24 mm and a free clamping height of at least 26 mm · only suitable for 1 1/8" stems (Ø 28,6 mm) with a construction height of max. 42 mm · material: aluminium 6061 T6 · weight: approx. 385 g