In this category you can find a reliable companion if you would like to do all maintenance jobs on your bike yourself. There are robust assembly stands available, which are suitable for all bikes, but also light stands, which are easy and quick to disassemble and transport. They are the right choice for riders who are often on the road with their bike and who don't want to use up too much space in the car. However, MTB fans will find a helping hand in this category, too.
Very stable, assembly stand, variable height. Its paint-friendly holder claw has an enormously practical quick-release system. The clamp arm is 360° rotatable in order to be able to carry the bike at different points (tube Ø 22-52 mm) and to make even tricky spots easily accessible. For a fast and safe assembly, clamp arm and height adjustment are comfortably variable via quick release closures. · can be disassembled · incl. tool deposit · working height approx. 100-160 cm · max. load approx. 18 kg
Transportable assembly stand, can be mounted/dismounted in a very short time. A user-friendly height adjustment, combined with a 360° rotatable holder claw, always brings your bike into the optimal position for working on it. Its claw with quick-release system guarantees a safe hold, without damaging frame or paint. Its tiltable foot construction gives the S 3000 a secure stand for the realisation of even the finest adjustment works. Thanks to the tool tray, your workplace stays neat and you do not have to search for tools anymore. · working height: approx. 90-145 cm · rubberised holder claw for tube Ø 22-52 mm · max. load approx. 18 kg · foldable to save space · stable · incl. tool tray · adjustment via quick release system
The multifunctional PCS-10 assembly stand can be completely adjusted without tools thanks to quick-release levers. This allows you to quickly adjust the height and inclination of your bike. The stand can be folded down to a compact size with a flick of the wrist for an easy transport and storage. The clamping pressure is precisely adjustable to protect thin or carbon tubes. A practical and robust helper that is not only suitable for a hobby workshop. · three-point system for high stability on almost every ground · adjustment of height, inclination and clamping pressure via quick-release levers · base tubes can be clicked in and loosened with snap fasteners · adjustable height (99–145 cm) · clamp rotates 360 degrees · clamp adjustable to fit tubes with a Ø between 24-76 mm (suitable for various tube shapes) · folds down to 104 cm for easy transport and storage · max. load: 36 kg
One for everything - this assembly stand is indispensible for your hobby workshop. Whether for adjusting the shifting, changing bearings or assembling a complete bike - this stand does not shrink from hard work. Thanks to the stable construction and high variability, you can work on road bikes/trekking bikes or mountain bikes. The recessed clamping shell ensures a secure clamping of the hub which makes the stand suitable for thru axle systems, too. Using the included adapter, you can also clamp the bike without front or rear wheel. · tool tray · variable working height thanks to an adjustable bottom bracket supporting surface · integrated centering function (only for lateral run-out) · foldable to approx. 100 cm x 40 cm x 10 cm · base dimensions when folded out: L: 86 cm/W: 34 cm
A foldable entry-level repair stand in high Park Tool quality. Two long base tubes ensure a safe stand. The bike can be clamped in and tilted without tools thanks to robust clamping levers or threaded rods. The height can be adjusted with two hex screws. A robust helper that should be part of every hobby workshop. · three-point system for high stability on almost every ground · adjustable height (99–145 cm) · clamp rotates 360 degrees · clamp adjustable to fit tubes with a Ø between 24-76 mm (suitable for various tube shapes) · folds down to 104 cm for easy transport and storage · max. load: 36 kg
Safe stand for your home workshop – the PrepStand Elite assembly stand by Topeak secures your bike optimally during the assembly. The stand can be folded together and offers high stability, thanks to its three-legged foot. The integrated compartment for small items and the rotatable mounting arm top off the package. Details: • easy-to-use assembly stand made of 6061 T6 aluminium • mounting arm: rubber clamping jaws for tubes with diameter 19 – 45 mm, 360° freely rotatable • integrated compartment for small parts • folding mechanism by means of two precise quick-release closures • stable three-legged foot • rubberised stand feet with HD folding mechanism • fold-out crank mechanism to precisely adjust the frame tube clamp • working height: 122 - 183 cm • max. load capacity: 25 kg • including transport bag • dimensions: approx. 135 cm (diameter stand space) / approx. 117 x 17,8 cm (folded) • weight: approx. 6,0 kg Manufacturer's ref. 159 000 19 / TW002-1
The Spider Team T3350 is developed together with WorldTour team mechanics who use assembly stands intensively on a daily basis. Thanks to their tips, you too can professionally and efficiently adjust, assemble and repair your bike. The Spider Team is light, compact when folded up and easy to carry. Due to the optimised bottom bracket support, you can also work on frames with differing brackets such as time trial bikes or bikes with electronic gearshift. · frame material: aluminium anodised · stable thanks to foldable tripod and large feet · work surface is tiltable and can be rotated 360° · working height: approx. 100 cm · pack size: approx. L: 120 / W: 23 / H: 18 cm · adjustment via quick release system · max. load: 15 kg · weight: approx. 4,25 kg · incl. tool tray · incl. front wheel adapter: 5 mm quick release, 9 mm axle (DT Swiss Thru Bold), 15 mm and 20 mm thru axle · incl. rear wheel adapter: 130 x 5 mm and 135 x 5 mm quick release, 10 mm axle (DT Swiss Thru Bold) and 12 mm axle Note: not suitable for e-bikes and trekking bikes.
Its very robust, paint-friendly holding clamp can be shifted over a height of 24 cm and can be rotated by 360°. The distance between wall and bike is approx. 43 cm. · holding arm rotates through 180° (saves space) · holding clamp with quick release mechanism, suitable for tube Ø 22-55 mm · incl. mount kit
Stable and easy handling. Can be folded together and assembled very fast. Suitable also for difficult works like mounting bottom brackets, pedals or for cleaning the bike. · working height crankset casing: approx. 77 cm · universally fitting, rubberised down tube holder claw · non-slip rubberised stand feet · removable tool deposit · small pack size (ideal for on the go)
The PrepStand ZX assembly stand by Topeak prevents scratches and damages on saddle tube and seat post thanks to its gentle holding mechanism. Saddle and seat post can be easily hooked into the holding arm before you can start screwing. Rubberised feet increase the stability. Details: • Easy-to-use assembly stand made of 6061 T6 aluminium • Mounting arm: rubber clamping jaws • Holder: saddle/seat post can be hooked in (not suitable for aero seat posts with a width of over 45 mm), front wheel on the floor • Folding mechanism with precise quick-releases • Rubberised bottom feet • Working height: 80 – 108 cm • Max. load: 25 kg • Dimensions: approx. 96 x 86 x 58 cm (open) / approx. 88 x 11 x 11 cm (folded) • Weight: approx. 3,29 kg (Tool tray optionally available, not included) Manufacturer's ref. 159 000 27 / TW016
Amateur mechanics and professionals alike will be impressed by the Professional Team assembly stand. It can be assembled within seconds, is extremely stable, offers a lot of adjustment options and can be folded up to save space. It is also suitable for difficult jobs on bottom brackets or stuck pedals! · height can be adjusted in 2 stages · working height: crankset: approx. 75 - 85 cm, fork: approx. 82 - 92 cm · crankset support made of robust, paint-friendly hard plastic · the bike can be clamped at the fork or at the rear stay (adjustable mount for different wheel bases) · extremely robust and stable · assembled in less than 15 seconds · can be folded up to save space: approx. 93 cm x 20 cm x 20 cm (fig. 1) · not suitable for wheels with 15 mm or 20 mm thru axle
With the BiciSupport Maxi Pro Team assembly stand, you get a stable stand with a very high quality. The foldable construction is extremely stable, the stand or the stand tube can be rotated through 360° by means of a special nut. Two holding arms can be positioned individually and make sure that the down tube is held securely. Diverse bike types can be clamped into the assembly stand, whether only with the front wheel, rear wheel or without wheels. The special rail, in which rear stay or fork are clamped, can be adjusted over a range of 55 cm, which allows you to clamp in bikes with a larger wheelbase as well. · Material: steel/plastic · Assembly without tools · Very stable · Height adjustment: 102/94/86 cm · Folding construction (84 cm total height) · Exchangeable crankset support (item no. BSR17) · Stand dimensions: 120 x 105 cm · Weight: approx. 10.2 kg Including: BiciSupport Maxi Pro Team assembly stand incl. adapter rear wheel to 135/140 mm hub width and front wheel 15 x 100 mm and 20 x 110 mm thru axle. Manufacturer's ref.: BS093
Safe stand for your home workshop – the PrepStand Pro assembly stand by Topeak secures your bike optimally during the assembly. The stand can be folded together and offers high stability, thanks to its three-legged foot. The integrated digital scale and the rotatable mounting arm top off the package. Details: • easy-to-use assembly stand made of 6061 T6 aluminium • mounting arm: rubber clamping jaws for tubes with diameter 19 – 45 mm, 360° freely rotatable, integrated digital scale • folding mechanism by means of two precise quick-release closures • stable three-legged foot • rubberised stand feet with HD folding mechanism • fold-out crank mechanism to precisely adjust the frame tube clamp • working height: approx. 122 - 183 cm • max. load capacity: approx. 25 kg • including transport bag (material: 1680D nylon, PVC coating) • including 2 x CR 2032 battery • dimensions: approx. 135 cm (diameter stand space) / approx. 117 x 17,8 cm (folded) • weight: approx. 6,2 kg Manufacturer's ref. 159 000 18 / TT2564