The category car bicycle carriers contains a wide selection of transport methods available from several manufacturers and in different price classes. In addition to diverse roof racks to fix your bicycle on top of your car, there are also car rear carriers and trunk bike carriers available. Special tow-bar carriers are designed to fasten the bicycle on the tow-bar of your car and some of these can be extended to accommodate up to a total of four bikes. In the accessories section, we offer various adapters, additional quick-releases for roof racks and protective devices for your bikes.
The Thule EasyFold is a user-friendly bike rack for almost all types of bikes. In just two steps, you can attach the carrier to the tow bar, fold it out and off you go – in a matter of seconds. When not in use, the Thule EasyFold can easily be stored inside the trunk, at home or in the holiday resort. Its robust rails even allow you to carry heavy e-bikes. · For 2 bikes · One-hand coupling with low closing force · Detachable frame holders facilitate mounting · Tommy nuts with torque function to protect sensitive frame tubes, e.g. made of carbon: click at 5 Nm · Rim holders with ratchet function, suitable for all tyres with a width of up to approx. 2,6"/66 mm · Comfortable folding down via foot pedal · Large folding angle for easy trunk access, even on vehicles with a lowered tailgates · Optionally available loading platform 915-2 (item no. 1115035) can be docked on · Rack lockable on vehicle and bike lockable to rack · Suitable for frame Ø 22-80 cm · Rail distance: approx. 22 cm · Dimensions when folded: approx. L: 67,5 cm/W: 31 cm/ H: 61,5 cm · Max. weight per bike: 30 kg · Max. load capacity: 60 kg · Weight: approx. 17,1 kg · 13-pin plug · TÜV and City Crash approved/Euro-BE · the weight of the rack incl. bikes must not exceed the maximum tow bar load of your vehicle. Tip: For clean transport and storage, we recommend to use the EasyFold carrying bag, item no. 1963308.
Bike carrier that can be mounted within seconds on estate cars and hatchback vehicles. The detachable frame holders are suitable for bike frames with Ø 22-80 mm. The outer frame holder is lockable. Details such as the quick release mechanism and the slidable bike rails are indicators of the high quality of the "Clip on high" by Thule. The tailgate can still be opened with a mounted carrier. Suitable for many car types, such as e.g. VW Golf II/III/IV/V, Opel Corsa etc. · for 2 bikes; max. load capacity: 30 kg · rail spacing: approx. 17 cm · TÜV approved · total weight: approx. 11 kg A vehicle type list can be found at www.thule.com
The perfect choice to transport your bike with thru axle in an aerodynamic way with the front wheel removed. The wide clamps of the attachment mechanism easily hold thru axles with a Ø of 12 – 20 mm. When using the included adapter, you can even securely fix quick release hubs. Of course, you can do this without having to remove the disc brake caliper. A compact solution that has clearly been developed for perfect ease of use. · Fast and easy installation · Locks bike to carrier and carrier to roof rack (Note: When clamping a fork for 9 mm quick release hubs, the bike is secured with the adapter 565-1, item no. 2207388, first.) · Half-round wheel rail made of high-quality aluminium · Lockable, ergonomic clamping device that is suitable for 12-20 mm thru axles and with the included adapter also compatible with fork dropouts for 9 mm quick release hubs (Attention! Not suitable for forks with carbon dropouts and level (not 3D) dropouts.) · Fits wheels with a tyre width of up to approx. 2,6“/66mm, incl. rim protector · Incl. T-track adapter kit 889-2 for all aluminium bars with a 20 mm wide t-track (Attention! Not suitable for square profile bars) · City Crash tested, TÜV/GS approved · Max. load 17 kg Manufacturer's ref. 565001
Thanks to the elaborate quick fastening mechanism, nearly every kind of front wheel fork, even with permanently mounted disc brake, can be fastened reliably in the bike rack. An adapter for thru axles with 20 mm Ø is included as standard. · Suitable for aluminium rail and square profile (cross bars) · TÜV approved · City Crash standard approved · Universally adjustable tyre holder for all sizes · Quick and easy mounting on the load bar · Bike rack can be locked on the load bar and bicycles can be locked on the bike rack · Elegantly curved bike rail made of highgrade aluminium · Max. load capacity up to 17 kg · Thru axle adapter for forks with 15 mm thru axle optionally available under item no. 1521069 · Incl. T-track adapter kit 889-2 · Incl. mounting kit for conventional square bars (outer clamping) Attention: not suitable for forks with carbon dropouts!
A safe and reliable bike carrier, suitable for most common bicycles. Its adjustable quick fastener straps fit all tyre sizes and its rim holders with their elevated bow facilitate loading. The frame holder comes with a quick-release function, which is also suitable for large frame diameters. Moreover, the bike carrier 532 can be locked to the load bar. · Max. load: 17 kg · Clamp and base holder with quick quick release; lockable · Suitable for a frame Ø 22-70 mm or oval shapes of max. 65 x 80 mm · Once the quick release has been adjusted to the frame diameter, loading and unloading is very easy · TÜV and City Crash approved · Bike can be locked to the rack · Rack can be locked to the load bar · Incl. t-track adapter kit 889-2 for all aluminium bars with a 20 mm wide t-track · Incl. mounting kit for conventional square profile bars (outer clamping)
The characteristic feature of this especially light construction is the fact that it can be adjusted optimally to the car shape via two knurled nuts. It is fixed to the car with 6 tension belts which have plastic-coated hooks at their ends. · TÜV and GS certified · loading capacity max. 45 kg · pre-assembled ready for use · assembly within seconds · high-grade anodised aluminium frame with plastic coating (total weight approx. 3,2 kg) · for up to 3 bikes · made in Germany A list of vehicle types is available at www.eckla.de
The Elite Sanremo impresses with its compact design and flexibility thanks to different adjustment possibilities. In this way, you can infinitely adjust the shell mount for the rear wheel and thus perfectly adapt it to the circumference of the wheel. When you fix the front wheel holder and position the quick release mount to the rear, you can also mount forks with a disc brake caliper. In this way, you cannot only transport road bikes, but also MTBs with ease. · suitable for roof racks with round, oval, rectangular and triangular cross bars (up to 80 mm width/46 mm height) · incl. mounting kit Attention! Not suitable for bike forks with thru axle mount.
Aluminium elements and other high-strength, fibreglass reinforced materials give this carrier its elegant and timeless design. High-strength rim holders with a ratchet function offer a convenient and secure fastening of the bikes. The folding mechanism with convenient foot pedal allows easy trunk access even with deep-drawn tailgates (e.g. VW T5). · Detachable and easily movable frame holders with quick fastening system facilitate loading the carrier · Tommy nuts with torque function to protect sensitive frame of tubes, e. g. made of carbon: click at 5 Nm · Improved and easily lockable towbar fastening with single-hand operation · Rack can be locked to the car and bikes can be locked to the rack · Optionally available loading ramp 915-2 (item no. 1115035) can be docked on · Basic version for up to 3 bikes with adapter 928, can be extended for a 4th bike (see item no. 1993886) · Rail distance: approx. 19 cm · Suitable for frame Ø 22-80 mm · High-strength rim holders with clever ratchet function, suitable for all tyres with a width of up to approx. 2,6"/66 mm · The weight of the rack incl. bikes may not exceed the maximum tow bar load of your vehicle · Max. load of the bike rack: 60 kg · Max. weight per bike: 25 kg · Suitable for e-bikes · Easily foldable · With 13-pin plug · TÜV and City Crash approved/Euro-BE · Weight: approx. 19 kg
Aluminium elements and other high-strength, fibreglass reinforced materials give this carrier its elegant and timeless design. High-strength rim holders with a ratchet function offer a convenient and secure fastening of the bikes. The folding mechanism with convenient foot pedal allows easy trunk. · Detachable and easily movable frame holders with quick fastening system facilitate loading the carrier · Tommy nuts with torque function to protect sensitive frame of tubes, e. g. made of carbon: click at 5 Nm · Improved and easily lockable towbar fastening with single-hand operation · Rack can be locked to the car and bikes can be locked to the rack · Optionally available loading ramp 915-2 (item no. 1115035) can be docked on · Basic version for up to 2 bikes with adapter 9281, can be extended for a 3rd bike (see item no. 1993886) · Rail distance: approx. 22 cm · Suitable for frame Ø 22-80 mm · High-strength rim holders with clever ratchet function, suitable for all tyres with a width of up to approx. 2,6"/66 mm · The weight of the rack incl. bikes may not exceed the maximum tow bar load of your vehicle · Max. load capacity of the bike rack: 51 kg · Max. weight per bike: 25 kg · Suitable for e-bikes · Easily foldable · With 13-pin plug · TÜV and City Crash approved/Euro-BE · Weight: approx. 16 kg
A successful concept that combines an elegant design with high stability and ease of use. The frame holder can be easily adjusted via a torque-controlled knob on the vehicle roof level. Thanks to the curved shape of bike rail and frame holder, the bike is automatically put into the right position. The wheels are kept in position on the wheel rests with slats. Diagonal quick-release wheel straps ensure a perfect stabilization. With the optionally available adapter, you can even transport your fat bike. · Holder with longer lower part to prevent a falling of the bike when fixing it · Extra large and soft pads perfectly distribute the pressure from the holder · Torque controlled clamping of the frame holder reduces the risk of damages – clicks when reaching 7 Nm · Diagonal rim straps with ratchet closure to perfectly fix the wheels on the rail · Tool-free installation and adjustment of the rack on the cross bar · Can be operated from each side · Locks bike to carrier and carrier to roof rack · Suitable for frame Ø: 22 - 80 mm or oval shapes of max. 80 x 100 mm · Fits wheel dimensions of up to 3", with the optionally available adapter 598-1 (item no. 2202116) up to 5" · Max. load: 20 kg · City Crash tested, TÜV/GS approved · Incl. T-track adapter kit 889-2 for all aluminium bars with a 20 mm wide t-track · Also suitable for square profile bars with the optionally available adapter kit 889-5 (item no.: 2207379) Manufacturer's ref. 598001
You surely know this problem: after transporting your bicycle on the roof of your car, you just want to start cyling, but then you notice that the handlebar and saddle are covered in dirt, such as dead flies and excrement. Make this problem a thing of the past with the Xtreme bike protector. All relevant parts of your bike are shielded from dirt. The protector can be washed at 30°C. · suitable for road bikes, ATBs and MTBs (26", 27,5" and 29", max. handlebar width: 700 mm) · material: 80% polyamide, 20% elastane · 1 piece
The robust and yet lightweight tow bar rack safely transports up to three bikes. If need be, you can even transport up to 4 bikes with the optionally available adapter 9261-1 (item no. 2199672). It is the perfect choice – whether for city bikes, MTBs or road bikes. If you want to transport bikes with a large wheel base, the extendible rails will be of help as their width can be easily adjusted. Once the VeloCompact is mounted and the bikes are secured, you can still easily access the boot thanks to the practical fold-down mechanism. Moreover, it is really easy to mount the bicycle rack: Its self-stabilizing mechanism allows you to put the bicycle rack onto the tow bar first and adjust it before you can secure it with the one-hand adjustable tension lever. When folded, the rack fits into almost every boot. • detachable and easy to move frame holder with a quick release system for easier loading • ergonomic tommy nut • easy securing of wheels thanks to long rim straps with ratchet system • fold-down mechanism via foot pedal for easy access to the boot (even with bikes mounted) • easy mounting and adjustment of the bicycle rack before locking the tension lever into place thanks to the stable connection to the tow bar (self-stabilizing mechanism) • adjustable one-hand operation for low operating forces • rack can be locked at the vehicle and the bikes can be locked on the rack • fits into almost every boot, as it is foldable • the tow bar rack is pre-assembled; no additional tools required • TÜV and City Crash approved/Euro-BE • suitable for up to 3 bikes, and for up to 4 bikes with the optionally available adapter 9261-1 (item no. 2199672) • suitable for frame tube Ø 22-80 mm • rail distance: approx. 19 cm • with 13 pin plug • max. weight per bike: 25 kg • max. load capacity of the tow bar rack: 60 kg • weight: approx. 19,2 kg Manufacturer's ref.: 926001 ATTENTION: The weight of the rack incl. bikes must not exceed the maximum tongue load of your vehicle.
This solid base rack by Thule is suitable for almost all cars with roof railing. It serves as a base for all common attachments such as bike racks, luggage carriers, roof boxes etc. Please find a list of the cars the 784/785 is suitable for on www.thule.com. · Max. load: 75 kg (please keep in mind the maximum roof load of your car) · Can be locked with a special screw · TÜV approved · Meets the City Crash Standard · Plastic coated steel cross bars 30 x 20 mm · Including: 2 cross bars incl. brackets · Model 784 (cross bar length 1.180 mm) or model 785 (cross bar length 1.270 mm) Please specify the desired model!
Practical roof rack top part that is easy to mount and compatible with most forks. You can fix road bikes as well as mountain bikes with a disc brake, and, with the optional adapter (item no. 1992090), you can even fix bikes with a 15 mm thru axle. · can be locked with a security key · double security lock · suitable for most roof racks with square, rectangular, round and elliptic cross-section (up to 80 mm width/50 mm height) · rear mount angle-adjustable via tooth lock washer · front mount can also be mounted facing to the rear, which makes it also suitable for disc brake systems · incl. mounting kit
Extension rail for a third bike for model G6 928 (item no. 1993868) or a fourth bike for model G6 929 (item no. 1993877). · holder arm with double clutch connects the two outer bikes · high-strength rim holders with practical ratchet function, suitable for all tyre sizes · max. load capacity of the rail: 15 kg · rail distance: approx. 17 cm · weight: approx. 2,5 kg · the weight of the carrier and the extension rail incl. bikes must not exceed the maximum tow bar load of your vehicle